​​​​Polyurethane Potting Glue

​​​​Polyurethane Potting Glue
Details:
High Insulation Polyurethane Potting Adhesive for Electronic Component Protection Products Description APS-1944 is a flame-retardant, gray two-component polyurethane adhesive that is solvent-free and cures at room temperature. This eco-friendly material is easy to handle and meets environmental...
Send Inquiry
Download
Description
Technical Parameters

High Insulation Polyurethane Potting Adhesive for Electronic Component Protection

 

Products Description

 
APS-1944 is a flame-retardant, gray two-component polyurethane adhesive that is solvent-free and cures at room temperature. This eco-friendly
material is easy to handle and meets environmental standards. The adhesive layer appears gray with moderate hardness, offering excellent waterproofing and insulation properties. It is ideal for sealing electronic components in environments with vibration, humidity, or strong corrosive conditions, providing shock resistance, moisture protection, insulation, and corrosion resistance. Its primary application is sealing electronic components on PCB boards.

1944

 

Gluing Application

 

Before use, thoroughly mix A glue to prevent powder sedimentation that may cause ratio imbalance. For
manual application: Accurately weigh AB components according to weight ratios, then stir thoroughly (about 1-2 minutes, ensuring
complete mixing between container walls and bottom). After vacuum degassing (vacuum level below 5000Pa for 3-5 minutes, depending
on glue quantity and vacuum level), apply glue along the edges of the product to be sealed. Allow curing at room temperature or under
heating. For automatic mixing equipment: During glue application, monitor for bubble formation during material extraction, promptly
perform vacuum degassing, adjust flow rate, and verify precise ratios (conduct multiple application tests before finalization). Confirm
parameters before application, then proceed with curing at room temperature or under heating

 

Performance

Project

metric

Acomponent

Bcomponent

Freeze

Appearance (visual)

Gray Liquid

Light yellow liquid

Basic chemical composition

Polybasic alc-ohol

Modified isocyanate

Viscosity(mPa · s,GB/T 2794-2013)

40000±10000

100±50

Density(g/ml,GB/T 13354-1992)

1.75±0.05

1.15±0.05

Condition of cure

Mix ratio(A:B)

100:20

Operation time(min,viscosity increased by 100%)

40~60

Full curing time (20g)

48~72h+25℃

After 7days of curing

Appearance (visual)

Gray solid

Density(g/ml,GB/T 533-2008)

1.62±0.05

Hardness(A,GB/T 531.2-2009)

60±5

Tensile strength (MPa,GB/T 528-2009)

≥3

Tensile elongation(%)(GB/T 528-2009)

≥100

Shear strength(MPa,GB/T 7124-2008)

≥1.5MPa(Al-PET)

Glass transition temperature(℃,DSC)

<-35

Thermal conductivity(W/(m.k),ASTM D5470)

≥0.8

Dielectric strength(kV/mm,GB/T 1408.1-2006)

≥18

Bulk resistivity(Q=cm,GB/T 1410-2006)

≥1.0*10¹³

Flame retardancy(UL94,1.5mm)

V-0

Company Profile 

 

product-963-557

 

 

1.jpg

 

1.jpg

.jpg

image007

 

product-1200-1200

FAQ

                            

                           product-1612-509

 

 
 
 
 

 

 

Hot Tags: ​​​​polyurethane potting glue, China ​​​​polyurethane potting glue manufacturers, suppliers, factory

Send Inquiry