Adhesive

Adhesives Bond Dissimilar And Hard To Bond Materials: Adhesives and tapes provide a barrier to reduce or prevent bimetallic corrosion that often occurs between different types of metal. Adhesives can bond hard to bond materials such as low surface energy plastics, oily metal and silicone rubber.

Adhesives Bond And Seal Simultaneously: Using adhesives to bond two surfaces helps seal out water, moisture, dirt and other environmental contaminants. Because the seal has adhesive properties, there is no need for a separate mechanical fastener.

Adhesives Reduce Stress Concentration At Screw And Rivet Points: Mechanical fastening requires drilling holes, and attachment at each hole concentrates stress at that point. Because adhesives and tapes bond over an area rather than points, they disperse the load over the entire bond area.

Adhesives Can Impact Production Efficiency: Incorporating adhesives and tapes into the manufacturing process can improve efficiency by eliminating process steps, failure rates, and time of assembly.

Adhesives Improve Appearance: Adhesives provide virtually invisible fastening to keep surfaces smooth and clean with no visible screws, rivet heads or protruding nuts and bolts. Adhesives also save the time and cost of refinishing welding burn marks.

Before use, stir 3-5min to make it uniformly. Take the glue as accurate ratio, by weight ratio, and stir the glue fully after mixed. Apply the mixture on the two components which need to bond with a thickness of 0.05-0.1mm, waiting 5-10min and then connect the two components. It could be cured in room temperature (12-24h), and also could be cured in 80°C (1h). This product is not dangerous, so it can be stored as usual. Keep the surface dry and cleaning. Avoid a direct contacting with part B for a long time.